home *** CD-ROM | disk | FTP | other *** search
/ Software Vault: The Gold Collection / Software Vault - The Gold Collection (American Databankers) (1993).ISO / cdr18 / commlink.zip / COMMLINK.DOC < prev    next >
Text File  |  1993-06-10  |  25KB  |  587 lines

  1.  
  2. Excerpts from DarkStar V1.01C documentation...
  3.  
  4.  
  5.  
  6.      19.0 - CommLink Overview 
  7.    
  8.           DarkStar! (tm) CommLink (r) is a full Multi-Media
  9.      terminal emulator for the  IBM  PC and compatible. In
  10.      addition to providing support for conventional  ASCII  and 
  11.      ANSI communications, CommLink provides its own  hi-speed
  12.      communications protocol, allowing HyperBBS access to any
  13.      DarkStar BBS.   
  14.    
  15.           The method by  which DarkStar! and CommLink operate
  16.      differs substantially  from  that  of conventional ASCII /
  17.      ANSI telecommunications. As a result, CommLink delivers a
  18.      performance response of up to  115,200  baud over the
  19.      conventional 2400 baud communications link.   
  20.    
  21.           Further, DarkStar! and  CommLink set forth a new
  22.      platform for interactive doorware known as  InterWare.
  23.      InterWare  allows fully animated multimedia applications to
  24.      be  driven  from  a remote DarkStar! HOST.   
  25.    
  26.           From the moment  of  CommLink's inception, it was
  27.      intended to be a "user  friendly"  communications platform. 
  28.      CommLink   allows novice users  to  work  easily  with
  29.      their  local  BBS systems,  while providing the "seasoned
  30.      veterans" an undeniable performance improvement  over the 
  31.      older ASCII/ANSI platforms.   
  32.  
  33.           Above all, CommLink's prime directive is to open a NEW 
  34.      frontier on the home front, bringing  users  back  from
  35.      commercial graphic systems to their  local BBS communities.
  36.      Equipped with superior performance, intuitive emulation, and
  37.      a graphics interface beyond  compare,  both  DarkStar!  and
  38.      CommLink are poised  to  carry the BBS  community  to  an 
  39.      objective of far-reaching  consequence:  Increased public
  40.      awareness and use of Electronic  Bulletin  Board  Systems,
  41.      putting the power of information  into  the  hands of John
  42.      Q. Public.   
  43.    
  44.           19.0 - SYSTEM REQUIREMENTS (CommLink)   
  45.    
  46.           CommLink requires the following:   
  47.    
  48.           1. An EGA, VGA, VGA MONO, SVGA, PGA,  OR  XGA  video   
  49.              controller >>  
  50.           2. At least 575Kb RAM ACCESSIBLE to CommLink 
  51.           3. A Microsoft compatible mouse or pointing device   
  52.           4. 400K of hard drive storage   
  53.           5. A Hayes compatible modem   
  54.           6. MS-DOS 3.0+, Windows, Windows/NT, or OS/2 2+   
  55.  
  56.           20.0 - TERMINAL EMULATION   
  57.    
  58.           CommLink'S intuitive configuration allows quick-start
  59.      operation. No terminal emulation configuration is
  60.      necessary, since CommLink automatically  detects  and 
  61.      responds  to  the  presence of ASCII, ANSI and DarkStar! 
  62.      communications formats.   
  63.  
  64.  
  65.  
  66.           21.0 - PORT CONFIGURATION   
  67.    
  68.           CommLink assumes a  default  setting  wherein  the 
  69.      modem  is attached to COM1:, and the mouse is attached to 
  70.      COM2.  These settings are easily  altered from Commlink's
  71.      Menu-Bar (at the top of the screen) by selecting
  72.      "Connections" then selecting "Configuration".   
  73.  
  74.  
  75.           22.0 - RUNNING CommLink   
  76.    
  77.           A. From CommLink's menu-bar under "Connections" you can
  78.           select "Dial Directory" which provides a pop-up window 
  79.           with the dialing directory. This directory is preloaded
  80.           with the phone  numbers  of  a few DarkStar! BBS
  81.           Support systems. To edit or modify an entry in the 
  82.           dialing directory, simply:   
  83.  
  84.           i. Hi-Lite the record you wish to modify by clicking
  85.           the mouse on that line  
  86.           ii. Press <R><E><T><U><R><N>   
  87.           iii. The  first field in the directory line provides
  88.           for the NAME by  which  you wish to reference a Board.
  89.           Backspace over or otherwise  enter  the NAME of the BBS
  90.           you  want  this  entry  to represent.   
  91.           iv. Press <R><E><T><U><R><N> to  jump  to  the second
  92.           field on the line.   
  93.           v. Provide the phone number corresponding  to  the 
  94.           name of the BBS you provided in (iii), above.   
  95.           vi. Press <R><E><T><U><R><N> to jump to the third
  96.           field.   
  97.           vii. The  third  field  allows  the specification of
  98.           Baud rate. Enter the speed of the modem that you are
  99.           calling in this field.   
  100.           viii. Press <R><E><T><U><R><N> to proceed to the fourth
  101.           field.
  102.           ix. The fourth field defines the Parity,  Data bits
  103.           and Stop  bits. An entry of N81 here would set the dial
  104.           at No Parity,  8 Data Bits, and 1 Stop bit. E71, on the
  105.           other hand, would provide Even Parity, 7 Data bits, and
  106.           1 Stop bit. NOTE: When in doubt, set it to N81.   
  107.           x. Press <R><E><T><U><R><N> to move the cursor  to  the
  108.           fifth and final field.  
  109.           xi. The  fifth  field  defines the linked subdirectory,
  110.           a cache  area used by CommLink to improve performance
  111.           and throughput. This name should be  unique for each
  112.           BBS entry, such that a temporary  cache directory  may 
  113.           be  created under this name.   
  114.  
  115. * Note: You may also dial a number manually from the fully
  116. functional terminal screen. Simply type > ATDT (the phone number)
  117. and press return.
  118.  
  119.           B. The  icons on the dialing directory  might  at 
  120.      first seem confusing. In an effort to clarify, the up and
  121.      down arrow  icons allow  you  to  page  through  the  
  122.      dialing directory. The ICONS with the telephone (not
  123.  
  124.   
  125.      circled) will auto-dial the dialing directory entry
  126.      hi-lighted  at  the   time the button is selected.   
  127.    
  128.           Similarly, selection of the telephone with the orange
  129.      circle surrounding  it  will auto-redial the hi-lighted  
  130.      entry every  60  seconds, until a  connection  is  
  131.      established.   
  132.    
  133.           The ICONS  of  the numeric keypad produces a window
  134.      enabling manual entry  of a number to be dialed (but not to
  135.      be stored in the dialing directory).   
  136.    
  137.           C. CommLink is uniquely  endowed  with  the  ability 
  138.      to auto-update itself to  the  most  current release  
  139.      anytime it  attaches  to a DarkStar-BASED BBS SYSTEM.   This
  140.      enables you to relax  in the knowledge that your   copy of 
  141.      CommLink will not be obsolete  by  a  newer   version.
  142.      (Remember, at 2400 baud - this autoupdate may take 20
  143.      minutes to receive.)
  144.           
  145.           As you  are  soon  to  learn, when  attached  to  a 
  146.      DarkStar-BASED BBS SYSTEM, CommLink  allows  remarkable
  147.      things to happen!  Music in the background while Pictures,
  148.      Icons, Buttons, AND Windows appear at   LIGHTSPEED, even  at 
  149.      2400  baud.  It  is  under  a  DarkStar BBS that  CommLink
  150.      shines, shattering   the rules you previously  thought 
  151.      etched  in  stone,   rules you  might  have  believed  ... 
  152.      rules many  believed to  separate the possible from the  
  153.      impossible.   
  154.    
  155.           It is under a DarkStar! HOST that CommLink frees your  
  156.      imagination and  opens a new world  for  online
  157.      communications.   
  158.  
  159.           23.0 - DarkStar! (a guided tour)   
  160.    
  161.           DarkStar! is the ONLY True Multi-Media BBS platform
  162.      available for the IBM  series  computer. Fully  Graphic, 
  163.      with  Sound Blaster support. 
  164.  
  165.           If you  do  not  have  a  Sound  Blaster, Commlink will
  166.      attempt to use the  PC  Speaker. Some of the Speakers in
  167.      modern  PC's may not have the capacity to produce  Music. 
  168.      If this is the case for  you  we suggest that you use the
  169.      "Configuration" menu  to use quiet mode  to  silence  the
  170.      speaker (by setting the AUDIO option to the OFF position). 
  171.       
  172.           The BBS you  dial may (depending upon configuration)
  173.      use Tech panels. An arbitrary exit may  be  found  on  the
  174.      upper left. The question  mark  on  the  upper right will 
  175.      call  the  help  functions (the help  function is not
  176.      available in the current release). The Tech panel may also
  177.      contain a  menu-bar at the top.  Clicking a selection on the
  178.      
  179.           Menu-Bar will bring up the functions available under
  180.      that selection.  
  181.   
  182.          
  183.           There are HyperButtons and ICONS (similar to push
  184.      button controls. These "push buttons" transfer you from one
  185.      function to another with a simple *CLICK* of your mouse
  186.      button. 
  187.    
  188.           Fields and Switches: These are for data entry. Fields
  189.      take multiple characters from the keyboard. Switches are
  190.      small boxes, after the  mouse is clicked inside it, the box
  191.      changes to a box with a check mark in it. Switches maintain
  192.      a yes/no value. 
  193.   
  194.           A PickList is used to provide you a list of items (like 
  195.      files, and messages). There are two arrows on the PickList.
  196.      These provide the ability  to scroll  up and down through
  197.      the list.  Just double-click on the item that interests you. 
  198.       
  199.           23.1 - File Transfers   
  200.    
  201.           DarkStar! has  the interesting capability of updating
  202.      the CommLink software. When you log  on to a DarkStar! BBS
  203.      which requires that you  operate a newer version of CommLink 
  204.      then  that which you  currently  using, a file transfer will
  205.      take place to transfer the newest version  to  you. This
  206.      Insures that you can use all newest the functions of
  207.      DarkStar! In addition DarkStar! will transfer ICONS, .PCX,
  208.      .GIF and .MOD files as required to provide you the user  the 
  209.      Ultimate   BBS Experience!  
  210.  
  211.           These  Graphics and Music files provide this experience
  212.      and once transferred  do  not have to be transferred again. 
  213.      So please be patient and enjoy the BBS.   
  214.    
  215.           24.0 - Message Base   
  216.  
  217.           Here is the information you will need to use  a
  218.      DarkStar! Message Base.  This  Message  Base has both Hot
  219.      Key and Mouse Functions built in.   
  220.    
  221.           24.1 - MenuBar   
  222.    
  223.           The MenuBar contains all the  functions  available in
  224.      our MessageBase Reader.  All in a simple, easy to  use
  225.      interface.  
  226.    
  227.           The Options available are:   
  228.    
  229.                     Editing: 
  230.                          - Enter a Message 
  231.                          - Reply to a Message  
  232.                          - Delete a message you have entered   
  233.  
  234.                     Functions:  
  235.                          - Goto Top of Board 
  236.                          - Goto Bottom of Board  
  237.                          - Next Message 
  238.                          - Previous Message   
  239.                          - Next Message in Thread 
  240.                          - Previous Message in Thread 
  241.                          - Goto a Message Number   
  242.                          - Change Board Areas   
  243.  
  244.    
  245.           24.2 - ToolBar   
  246.    
  247.           The ToolBar has the following functions:   
  248.    
  249.                  Function                    Symbol    
  250.            ------------------------------    ------ 
  251.           Goto Top of Board                  << 
  252.           Goto Bottom of Board               >> 
  253.           Next Message                       >> 
  254.           Previous Message                   << 
  255.           Next Message in Thread             T>> 
  256.           Previous Message in Thread         <<T 
  257.           Goto a Message Number              Read       
  258.           Next Block of Message              V 
  259.           Read Previous Block of Message     ^   
  260.  
  261.           24.3 - Hot-Keys   
  262.  
  263.           The Hot-Keys provide another way to access  the 
  264.      MessageBase  and maintains  compatibility  with  many  of 
  265.      the other message base  readers  on  the market. The 
  266.      functions supported are:   
  267.    
  268.  
  269.         Function                           Hot-Key  
  270.    ------------------------------     ----------------  
  271.      Next Message                       Right Arrow  
  272.      Previous Message                   Left Arrow  
  273.      Next Message in Thread             Plus or Ctrl Right Arrow 
  274.      Previous Message in Thread         Minus or Ctrl left Arrow 
  275.      Goto a Message Number              Return   
  276.      Read Next Block of Message         Page Down  
  277.      Read Previous Block of Message     Page Up  
  278.      Goto to Beginning of Board         Home  
  279.      Goto to End of Board               End   
  280.    
  281.  
  282.           24.4 - Function Definitions   
  283.    
  284.           This section will describe each  of  the  functions 
  285.      available  along with  the corresponding  ToolBar  Symbol 
  286.      and Hot-Key if any.   
  287.  
  288.           a.  - Enter a Message   
  289.   
  290.           Enter a  message will allow you to enter a  message 
  291.      into  the  MessageBase.   
  292.    
  293.           Hot-Key - Insert         ToolBar - none   
  294.    
  295.           b.  - Reply to a Message   
  296.    
  297.           Reply to  a  message  is the same as Enter a Message
  298.      with the exception that the TO: is completed for you.   
  299.    
  300.           Hot-Key - none           ToolBar - none   
  301.  
  302.    
  303.           c.  - Delete a Message   
  304.    
  305.           Delete a Message (you have entered) will remove a
  306.      message from the MessageBase and update any thread data. For
  307.      example, the thread is  three  deep  and the first is
  308.      deleted the next message in the thread will have the
  309.      previous entry removed.  The next entry will remain  
  310.      unchanged.   
  311.    
  312.           Another example  is,  the thread is three  deep  and 
  313.      the middle entry is  deleted  the  first  and  last messages
  314.      are updated to indicate the correct thread path.   
  315.    
  316.           Hot-Key - Delete         ToolBar - none   
  317.    
  318.           d.  - Goto To Top of Board   
  319.    
  320.           This function will go to the  first message on the
  321.      board.  A board is the specific message area that you are in
  322.      at the time. As an example you may be in the Local Message
  323.      Area of that particular BBS. 
  324.    
  325.           Hot-Key - none           ToolBar - <<   
  326.    
  327.           e.  - Goto the Bottom of Board   
  328.     
  329.           This function  will  go to the last message on the
  330.      board.  Again a board is the particular message area that
  331.      you are in. You may be  reading messages about 'Programming'
  332.      in one of the YouthNet Echo  areas. That message area is a
  333.      'Board'. 
  334.    
  335.           Hot-Key - none           ToolBar - >>   
  336.    
  337.           f.  - Next Message   
  338.    
  339.           This function will go to the next message on the board. 
  340.  
  341.           Hot-Key - Right Arrow    ToolBar - >>   
  342.    
  343.           g.  - Previous Message   
  344.    
  345.           This function  will  go  to  the  previous message in
  346.      the board.    
  347.   
  348.           Hot-Key - Left arrow     ToolBar - <<   
  349.    
  350.           h.  - Next Message in Thread   
  351.    
  352.           A thread is a series of LINKED messages. If Joe is
  353.      chatting to Mary about a modem problem, it would be nice to
  354.      see what Mary's response was. You can jump to that
  355.      particular message (and bypass all the other ones in
  356.      between) with the thread commands. 
  357.  
  358.    
  359.           The lower left side of the screen will contain one of
  360.      the following symbols should the current message  be  part 
  361.      of  a thread:   
  362.  
  363.           <<T There exists a prior threaded message  
  364.            T>> There exists a next threaded message   
  365.    
  366.           Hot-Key - + key          ToolBar - T>>   
  367.  
  368.           i.  - Previous Message in Thread   
  369.    
  370.           Goes to  the  previous message in a thread.  Allowing
  371.      you to read the original message and any replies to it.   
  372.    
  373.           The lower Left Side of the screen will have one of the
  374.      following symbols:   
  375.    
  376.           <<T There exists a previous threaded message   
  377.           T>> There exists a next threaded message   
  378.    
  379.           Hot-Key - Minus key      ToolBar - <<T   
  380.    
  381.           j.  - Goto A Message Number   
  382.    
  383.           Jumps to a particular message  number. If  the  message 
  384.      number does not exist or belongs to another board a message
  385.      will be displayed  indicating  that  the message number
  386.      could not be found on this board.  
  387.            
  388.           Hot-Key - return         ToolBar -     
  389.     
  390.           k.  - Page Down   
  391.    
  392.           Page down  displays  the  next block of the message
  393.      text.  In the lower right hand corner  of the screen the
  394.      word "More" will appear to  indicate  that  there  is  more 
  395.      text  to  be displayed.  
  396.   
  397.           Hot-Key - Page Down      ToolBar - V   
  398.    
  399.           l.  - Page Up   
  400.    
  401.           Page up  displays the previous block of the message
  402.      text.  In the lower right hand corner  of the screen the
  403.      word "More" will appear to  indicate  that  there  is  more 
  404.      text  to  be displayed.  
  405.   
  406.           Hot-Key - Page Up        ToolBar - ^   
  407.    
  408.           m.  - Boards   
  409.  
  410.           Displays a  PickList  of  the boards available within
  411.      the messagebase.  Click on the Board that you want to use.  
  412.      
  413.           Hot-Key - none           ToolBar - none   
  414.    
  415.  
  416.  
  417.           24.5 - Message Base Quick Reference List   
  418.  
  419.           The following table is a Quick Reference to the
  420.      functions available in  the DarkStar! MessageBase. You may
  421.      wish to print this listing out on your printer and keep it
  422.      posted by your computer as an easy reference.
  423.    
  424.      Function                     Hot-Key             ToolBar  
  425.     --------------------------  ----------------      ------- 
  426.      Enter a Message               Insert              none 
  427.      Delete a Message              Delete              none 
  428.      Edit a Message                Return              none  
  429.      Goto To Top of Board          Home                << 
  430.      Goto the Bottom of Board      End                 >> 
  431.      Next Message                  Right Arrow         >> 
  432.      Previous Message              Left Arrow          << 
  433.      Next Message in Thread        Plus                T>> 
  434.      Next Message in Thread        Ctrl Right Arrow    T>> 
  435.      Previous Message in Thread    Minus               <<T 
  436.      Previous Message in Thread    Ctrl Left Arrow     <<T 
  437.      Goto A Message Number         Return              Page Down 
  438.      Page Down V Page up  Page Up ^  
  439.      Reply to a Message            none                none 
  440.      Boards                        none                none  
  441.      MessageBases                  none                none   
  442.         
  443.           25.0 - ANSI Mode   
  444.    
  445.           Commlink is  capable  of connecting to ANY ANSI-based
  446.      BBS available. There is no need  for  another  terminal 
  447.      program with Commlink. Commlink will automatically switch to
  448.      ANSI  mode when you call an ANSI based BBS.  The Commlink
  449.      header and the menu-bar will remain on the screen and ANSI 
  450.      throughput  is  displayed below.    
  451.    
  452.           You will  notice  that  the  screen  looks different
  453.      then standard ANSI terminals.  Commlink's  Smooth  Scroll
  454.      give the effect of the screen sliding up not that jumpy look
  455.      that ANSI terminals have.  
  456.  
  457.           Compare  any  other  Terminal program  to Commlink and
  458.      we  are  sure  you will agree that we have taken even ANSI a
  459.      step further.   
  460.    
  461.           26.0 - Registration   
  462.    
  463.           Commlink is getting better  every  day  with  new
  464.      options  added all the time.  So keep in touch.  Better  yet 
  465.      why  not register your copy  of Commlink!  You will find an
  466.      order form below.  Please take the time to  fill  it out. 
  467.      We would like to say "Thank You" in advance because we know 
  468.      you  will like what you see. With your help, we can continue
  469.      our research in this field, and change the way the world of 
  470.      telecommunication works over the years to come.   
  471.  
  472.  
  473.  
  474.  
  475.           
  476.                  MC/Visa Zero-Paperwork Registration!          
  477.                                                                
  478.            We now offer our MasterCard/Visa  zero-paperwork    
  479.            registration!  Simply phone (501) 631-9806,  and    
  480.            provide the operator with your MC/Visa number.      
  481.                                                                
  482.            A charge will appear on your  card  at  the next    
  483.            billing cycle,  and in most cases your diskettes    
  484.            will be shipped same-day.                           
  485.                                                                
  486.             Thank you in advance for your contributions to     
  487.             our research...                                    
  488.                                                                
  489.           
  490.  
  491.  
  492.  
  493.  
  494.                                   Order Form 
  495. -------------------------------------------------------------------------------
  496.  
  497.                             Make checks payable to: 
  498.  
  499.                            Paragon Technologies Ltd. 
  500.                                 2409 W. Dogwood 
  501.                                 Rogers, AR 72756 
  502. -------------------------------------------------------------------------------
  503.  
  504.            SySop's Name: ___________________________________________ 
  505.                 Address: ___________________________________________ 
  506.                    City: ___________________________________________ 
  507.                   State: ________________   ZIP: ___________________ 
  508.              Home Phone: ____________________ 
  509.  
  510.        Checks and Money Orders must be drawn on U.S. banks in U.S. funds 
  511.        ----------------------------------------------------------------- 
  512.  
  513.          Payment: (check one): [ ] Cash    [ ] Check    [ ] Money Order 
  514.       Diskette type (check one): [ ] 360k   [ ] 1.2m   [ ] 720k   [ ] 1.4m 
  515.  
  516.      Qty Description                                          Price  Amount 
  517.      --- ---------------------------------------------------  -----  ------ 
  518.  
  519.      ___ CommLink Shareware Registration (Registered 
  520.              DarkStar BBS SySops may use the Shareware 
  521.              CommLink FREE)                                    $35  $______ 
  522.  
  523.      ___ DarkStar! BBS (DARKSTAR.EXE) and DarkStar 
  524.              Configuration (DSCONFIG.EXE) - includes           
  525.              ICONEDIT, BBSGEN20, and a world of added
  526.              tools for DarkStar BBS SysOp design!              $99  $______ 
  527.  
  528.      ___ Icon Editor (ICONEDIT.EXE)                            $35  $______ 
  529.  
  530.      ___ Panel Editor (BBSGEN20.EXE)                           $75  $______ 
  531.  
  532.      ___ MessageBase Editor (DSMBASEM.EXE)                     $20  $______ 
  533.  
  534.      ___ DarkStar! BBS Introduction Package - Same as the 
  535.              DarkStar! BBS Package (FIRST 250 Copies)          $99  $______ 
  536.  
  537.      ___ Competitive Upgrade Offer - ROBO SysOps - We will 
  538.              BUY your registered copy of ROBO BBS.  To 
  539.              qualify you must surrender to us at time of 
  540.              registration all ROBO documents and Disks. 
  541.              (Value $20 applied to this ORDER)                      $______ 
  542.  
  543.      ___ Paragon Development Environment (PDE) - Commercial 
  544.              Application Generator and BBSGEN20 replacement 
  545.              with DBase III Support.                          $495  $______ 
  546.  
  547.      --- QBFX QuickBasic programmer's toolkit - Allows 
  548.              third-party developers access to the tools
  549.              used in the development of the DarkStar and
  550.              PDE platform. Includes PCX, GIF, background
  551.              MOD audio, and a variety of additional tools!     $99  $______
  552.  
  553.                                                     Subtotal        $______ 
  554.  
  555.  Arkansas residents:  Please add 4.5% sales tax.                    $______ 
  556.  
  557.  Shipping and handling:  United States (free) 
  558.                          Overseas ($5.00)                           $______ 
  559.  
  560.  
  561.                                                        Total        $______ 
  562.  
  563.  
  564.        The following information will help shape DarkStar! in the Future. 
  565.  
  566.      Have you been a SysOp Before?  [ ] Yes  [ ] No  How Long? _______________ 
  567.  
  568.      BBS Name:________________________________________________________________ 
  569.  
  570.      BBS Phone: _______________________ Fido Address: ________________________ 
  571.  
  572.      Current Software: _______________________________________________________ 
  573.  
  574.      Monitor Type: [ ] EGA  [ ] VGA  Resolution: _______ x _______  DPI:______ 
  575.  
  576.      Model Video Card: _______________________________________________________ 
  577.  
  578.      Modem: Speed: __________  Model: ________________________________________ 
  579.  
  580.      Processor Type: [ ] 286 [ ] 386SX [ ] 386DX [ ] 486SX [ ] 486DX [ ] Other 
  581.  
  582.      Memory Manager: [ ] QEMM [ ] EMM386 [ ] Other ___________________________ 
  583.  
  584.      Multi--Tasker: [ ] DV [ ] DVX [ ] Windows [ ] OS 2 [ ] Other ____________ 
  585.  
  586.      Network Type: ___________________________________________________________ 
  587.